Failed Drives on Buffalo Linkstation
I have a Buffalo Linkstation Duo LS-WXL series NAS drive with a RAID configuration utilising 2 off WD Caviar Green 1TB drives, the unit is at least 8 years old. Drive 1 failed about 2 years ago, I replaced it (1TB Red) and rebuilt the RAID, system functioning OK until 2 weeks ago. I am in Hertfordshire.
The unit began shutting itself down, there was continued power to it at all times, no errors were flagged by it, I rebooted and it appeared to be functioning but after some time shut down again – this happened a couple more times, then an error was flagged that drive 2 (the original) had a degraded functionality. I replaced drive 2 with a Red 1TB drive and rebuilt the RAID.
This took less than 2 hours, no errors shown on start up but no information on the drive, showing “Storage: RAID Array 1: 0.0 GB / 916.7 GB (0.0 %)” on the buffalo web drive management application. Do you have a data recovery service in Hertfordshire? I have removed power from the unit and put the 2 drives back into the unit that were fitted at point of failure
iPhone2 32Gb Fix
The battery expanded, breaking the screen. The iPhone charges and the home Botton works, but I can’t unlock it. It has the “core display” but not the external screen.
Seven years ago, my wife took it to a local mobile repairs shop to fix it and recover the data. Everything the did it was to change the iPhone’s name when connected to Photos….
Now, it charges, displays the locked home page, the home Botton works, and Photos recognises the device.
1) I would like to know if there is still data in the device. More specifically, pictures.
2) if the pictures are still there, I would like to know if they are recoverable and the cost to recover them
Is there a phone recovery service in Hertfordshire?